Mini FM Transmitter with 2 Transistors

Here the simple and low cost FM transmitter which powered using two transistors. This circuit may be tuned to operate over the range 87-108MHz with a range of 20 or 30 metres. The circuit works with 9V power supply, use regulated power supply for better quality.

FM Transmitter with 2 Transistors circuit diagram

The coil L1 was consist of 7 turns on a quarter inch plastic former with a tuning slug. The tuning slug is adjusted to tune the transmitter. Actual range on this prototype tuned from 70MHz to around 120MHz. The aerial is a few inches of wire. Lengths of wire greater than 2 feet may damp oscillations and not allow the circuit to work.

Although RF circuits are best constructed on a PCB, you can get away with veroboard, keep all leads short, and break tracks at appropriate points.

One final point, don’t hold the circuit in your hand and try to speak. Body capacitance is equivalent to a 200pF capacitor shunted to earth, damping all oscillations.

One thought on “Mini FM Transmitter with 2 Transistors

  1. Hello friends my you get some help for the making of FM transmitter of long rang. so visit my blog http://kpkpkalpesh.blogspot.in/2011/12/fm-radio-transmitter.html may be it is helpful to u,I Maid IT successfully 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.