400W RMS Stereo Power Amplifier Part List

Transistors:

D1047 – 4 pieces
B817E – 4 pieces
A1015 – 6 pieces
TIP41C – 4 pieces
TIP42C – 4 pieces

Resistors:

6.8 ohms – 1W (blue, gray, gold) – 4 pieces
100 ohms – 1W (brown, black, brown) – 4 pieces
18K – 1 / 2W (brown, gray, orange) – 4 pieces
1K – 1 / 2W (black brown, red) – 2 pieces
10 ohms – 1W (brown, black, black) – 4 pieces
270 ohms – 1 / 2W (red, violet, brown) – 2 pieces
10K – 1 / 2W (brown, black, orange) – 2 pieces
330 ohms – 1 / 2W (orange, orange, brown) – 2 pieces
56 ohms – 1 / 2W (green, black) – 2 pieces
27 ohms – 1W (red, violet, black) – 2 pieces
820 ohms – 1 / 2W (gray, red, brown) – 2 pieces
0.47 ohms – 5W – 8 pieces

Capacitors:

0.1uF/100v – 4 pieces
47uF/63v – 2 pieces
2.2uF/100v – 2 pieces
330pF (ceramic) – 2 pieces
4700uF/63v – 2 pieces

Miscellaneous:

Diode 1N4004 – 10 pieces
Diode P600J – 4 pieces
2 coils of 10 turns with 1/4 copper core 18.
7 amp 33x33v transformer – 2 pieces

400W RMS Stereo Power Amplifier Top PCB Design

Power Supply Schematic for 400W RMS Stereo Power Amplifier

The power supply circuit is simple, you may use 10A transformer and 6800uf of capacitor. The diode value refer to the current value from transformer and it should be have higher value. For example if you use 7A transformer, then use 10A diodes.

Input Connection with Volume Control

This is the input connection for 400W RMS stereo power amplifier with volume control using a stereo potensiometer.

The post 400W RMS Stereo Power Amplifier appeared first on Circuit Schematic Diagram.