The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes for this tracking transmitter diagram, try to discover this circuit by yourself.. 🙂
Components list:
R1 = 100K Ohms
R2 = 10 Ohms
R3 = 47K Ohms
R4 = 220 Ohms
C1 = 4.7uF/16V
C2, C5 = 1nF
C3 = 10 – 40 pF trimmer capacitor
C4 = 4.7pF
Q1 = 2N3906 PNP transistor
Q2, Q3, Q4 = 2N3904 NPN transistor
L1 = 4-5 turns of 22 ga. magnet wire close wound around 1/8″ non-conductive core
Antenna = 10 to 12″ hookup wire
With wide voltage supply (3-9v), this FM tracking transmitter can used 3V or 9V battery to operate.
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
This is the circuit diagram of white line follower toy. The actuator of the toy…
The following diagram is the circuit diagram of 20W power amplifier which build based tube…