This is a 100W RF amplifier built based on RF power transistor BLY94.
Active components: BLY94
Coaxial cable length : K x Lambda / 4, where K = 0.66 for 50 ohm cable and K = 0.8 for 75 ohm cable.
L1 = L6 = 2 turns / 1.5mm / 14mm
L2 = L7 = 8turns/0.8mm/4mm/ferite or HF
L3 = L8 = 4 turns / 2mm / 14mm / gap 1mm
L4 = L9 = 20turns/0.3mm / 3mm / ferite
L5 = L10 = 1 turn / 2mm / 15mm
BLY94 is a RF Power transistor in a SOT-55 case which operate in class-B with a Vce of 28V and a frequency transition of 175MHz. BLY 94 output power is 50W with a 7dB ( 6x ) power gain at 175MHz.
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…
View Comments
nada nesecito el costo de este transistor urgente. gracias
hi dis is a good circuit