This is a 18 Watt audio amplifier circuit based on power IC HA13118. The supply voltage required for this circuit is 8 – 18V DC, at least 1 to 2 Amps. Maximum output power will only be obtained with a power supply of 18V at greater than 2 A, using a 4 ohm speaker. The power supply should be well filtered to reduce mains hum, a regulated supply will reduce noise even further. Extra filtering is unnecessary if operating from a battery supply.
Components List:
Resistors : R1, R2 ___________________ 2R2 ohm Capacitors : C1, C2, C4, C5, C6 _______ 100uF/16V electrolytic capacitor C3 _______________________ 10uF/16V electrolytic capacitor C7, C8, C12 ______________ 100nF C9 _______________________ 2,200uF/25V electrolytic capacitor C10 ______________________ 1uF/50V electrolytic capacitor C11 ______________________ 100pF Misc. I.C. _____________________ HA13118 Heatsink
C10 is the input coupling capacitor and blocks DC from the input. C11 bypasses any RF which may be present at the input. C1 & C2 provide an AC ground for the inverting inputs of the IC. R1/C7 and R2/C8 provide a high frequency load for stability with difficult speakers. C5 and C6 provide “bootstrap” feedback for the IC. C9 and C12 provide power supply filtering. Don’t forget that heatsink is a must for this class AB power amplifier circuit.
18 Watt Audio Amplifier Specifications :
D.C. Input : 8 ? 18V at 1 - 2 A Power output : 18W maximum, 4 ohm load, 18V DC supply > 10W RMS 4 ohm load, 18V DC supply > 5W RMS 8 ohm load 18V DC supply > 6W RMS 4 ohm load 12V DC supply S/N ratio : > 70 dB THD < 0.2% @ 1W Freq. Response : ~ 30 Hz to 30 kHz, ?3 dB Input level : < 25 mV, for full output (G > 50dB) Input Impedance ~ 30 k ohm
Download 18 Watt Audio Amplifier with HA13118 full explanation:
Download HA13118 datasheet:
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…