Categories: Audio

Echo Chamber + Robot Voice Effect

The following circuit is the combination of echo chamber circuit that will make the sound repeated, just like an echo sound when you speak in cave. And the robot voice effect circuit that change the audio signal?from input to become sound like a robot voice. Four pieces of 8 legs ICs used to build this echo chamber circuit.

To make the robot voice effect, there are some components need to be change.
Here some components need to replace for robot sound effect:

  • R6 should be remove from the circuit
  • R15, replace with 39K resistor
  • R16, replace with 6.8K resistor
  • C14, replace with 15-20pF nonpolar capacitor
  • Adjust VR1, VR2 and VR3 to get the robot sound effect as you like.

Good luck 🙂

circuit schematic

Share
Published by
circuit schematic

Recent Posts

Switched ON Bike Lamp

Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…

55 years ago

3A Switching Power Supply Regulator

This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…

55 years ago

Remote Control Tester

Here is the remote control tester circuit. This circuit is really a simple and easy…

55 years ago

Current Output Multiplier for 78xx Regulator

This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…

55 years ago

4 Transistor FM Tracking Transmitter

The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…

55 years ago

White Line Follower

This is the circuit diagram of white line follower toy. The actuator of the toy…

55 years ago