The following diagram is the circuit diagram of basic monostable multivibrator based IC timer 555. This circuit uses only 4 electronic components that are a timer IC, two capacitors and a resistor.
Components List:
A multivibrator is an electronic circuit used to implement a variety of simple two-state systems such as light emitting diodes, timers and flip-flops. The monostable multivibrator will create a condition: in which one of the states is stable, but the other is not?the circuit will flip into the unstable state for a determined period, but will eventually return to the stable state. Such a circuit is useful for creating a timing period of fixed duration in response to some external event. This circuit is also known as a one shot. A common application is in eliminating switch bounce.
R1 : read the explanation C1 : read the explanation C2 : 10nF IC1 : Timer IC LM555
Notes:
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…
View Comments
@edgard you were right dude. i've experienced the problem. it is called the pull up resistor that pulls the level of pin 2 to low when the switch is pressed and maintain at high when the switch is open. with the resistor when the switch is open the pin2 floats.
Here is neat explanation on the operation of monostable multivibrator using ic555.
http://yengal-marumugam.blogspot.com/2011/09/monostable-multivibrator.html
This circuit need a resistor of 10k between pin 2 and positive (pin 8)to polarize it.
Without it, the circuit does not work, the out stands always in high level.
(My English is poor, I know it).
Adding this resistor the circuit works properly and is very useful.