This is Dan Armstrong Green Ringer guitar effect for your electric guitar. The guitar effect is sold at high price at the market. Now, you can build your own low cost guitar effect… 🙂
The transistor marked ” * ” has no markings other than three stripes: green, blue and white from top to bottom. It is probably a log gain NPN used as a dual diode with the anodes connected together at the base of the final transistor.
The continuity test on the device shows no conductivity except that the topmost pin conducts when it is positive of the pins in the middle and other side; otherwise, no conduction. This? is I would expect if it were an NPN with the same pinout (base, collector, emittor) as the other transistors.
This circuit operated with 9V supply. Use battery or regulated power supply for better result.
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…
