Here is the wailing alarm siren circuit diagram:
Components List:
R1,R5___________ 4.7K R2______________ 47K R3______________ 10K R4______________ 100K Rx______________ *see text |
C1,C4__________ 100uF/25V, electrolytic C2,C3__________ 0.01uF (10nF), ceramic T1_____________ 2N3702 (NTE159, TUP, etc.) IC1,IC2________ LM/NE555, MC1455P, etc LS_____________ Loudspeaker |
This alarm circuit uses timer IC to generate frequency. The circuit has wide range supply voltage 5V to 15V DC.
*The Loudspeaker LS and the resistor marked “Rx” should be together 75 ohms. If you have a standard 8-ohm speaker then Rx is 67 ohms. The nearest value is 68 ohms. So for a 8 ohm loudspeaker Rx is 68 ohms. For a 4 ohm loudspeaker Rx is 71 ohms, for a 25 ohm loudspeaker Rx is 50 ohms, etc.
circuit diagram by Tony van Roon,
source: http://www.sentex.ca/~mec1995/circ/wailing.htm
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…
View Comments
i want functional working of wailing alram siren