The following diagram is a very easy and simple electronic combination lock based on IC LS7220.
Component Part List:
Circuit Notes:
This could be the circuit diagram of a easy electronic combination lock by using IC LS 7220.This circuit may be applied to activate a relay for controlling (on & off) any device each time a preset combination of 4 digits are pressed.The circuit may be operated from 5V to 12V.
To set the mixture connect the appropriate switches to pin 3,4,5 and 6 of the IC through the header.As an example if S1 is connected to pin 3, S2 to pin 4 , S3 to pin 5, S4 to pin 6 of the IC ,the combination is going to be 1234.This way we can create any 4 digit combinations.Then connect the rest of the switches to pin 2 of IC.This will cause the IC to reset if any invalid key is pressed , and entire key code has to be re entered.
When the correct key combination is pressed, then the output ( relay) will be activated for a preset time driven by the capacitor C1.Here, it is set to be 6S.Increase the value of C1 to increase the preset time.
For the keypad, arrange the switches in a 3X4 matrix on a PCB (Printed Circuit Board).Write the digits on the keys by using a marker.Instead of applying numbers I wrote some symbols!.The bad guys is going to be more confused with this.
Download LS7220 datasheet from the following link:
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…