You can easily activate the LED from home electrical power line with this circuit diagram. You just need to add a nonpolar capacitor and a 1Kohm / 1W metal oxide resistor to activate the LEDs from home power line with serial connection.
Note:
Change the capacitor value from 0.47uf/250V to become 0.22uF/400V for 240VAC power line input.
Use safety tools, be carefull during installation since it use high electrical voltage.
Circuit designed by Ken Schlutz and drawn by Dave Johnson
Do you have a bicycle..? why don't try to build this circuit..?. Powered using battery…
This is the circuit diagram of 3A switching power supply regulator: Simple and cheap, the…
Here is the remote control tester circuit. This circuit is really a simple and easy…
This is the circuit diagram of current output multiplier designed for regulator IC LM78xx. By…
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes…
This is the circuit diagram of white line follower toy. The actuator of the toy…